Billiard Cue, Pool, Predator P3 Teal LL, Uni-Loc

Predator P3 Teal - cool, calculated, and impossible to miss

Cool. Calculated. The P3 Teal cuts through the dim of any poolroom with a vivid teal color that demands attention before you even line up your shot. But this cue's edge goes far deeper than its surface.

The world's most advanced cue construction drives every shot: 30-piece construction of alternating hard maple and dense ash splices engineered for maximum stiffness, dead-straight accuracy, and a solid hit that tells you everything you need to know. Finished with sleek matte black carbon fiber details, the P3 Teal pairs raw power with an ice-cold edge.

Step up to the table. Take your shot.

Features:

• Wrap: Leather Luxe
• Gloss teal cue with black center stripe in matte finish
• Carbon collar and butt cap in matte finish
• Leather Luxe wrap
• Etched P3 logo on the front of the collar
• Etched Predator cat on the front of the butt cap
• Etched P3 logo and serial number on the back of the butt cap
• Uni-Loc Quick Release Joint
• Uni-Loc Weight Cartridge System
• 5x REVO cleaning towelettes
• 1x Predator microfiber cleaning cloth
• Predator & REVO patches
• Limited quantity

Shaft: Predator Revo 12.4mm, Uni-Loc, White Vault Plate
The Most Advanced Shaft in the World. The ultimate in billiards technology and performance. Made of carbon fiber composite, REVO 12.4mm shafts incorporate more than twenty years of technological innovation and testing. REVO shafts feature the lightest front end mass, the lowest rate of rise taper, greatest radial consistency, and most durable construction. The result? The most accurate billiards shaft in the world at both low and high speeds, featuring the smoothest finish, the most spin, and uncompromising durability and strength.

• Most accurate Predator shaft at low and high speeds
• Tip: Predator Victory (Medium)
• 12.4mm tip
• REVO Low-rise taper with 8% rise over the first 14 inches
• REVO Ferrule-less construction

REVO SHAFT FINISH MAINTENANCE.

REVO carbon composite shafts should never be sanded or modified. Sanding the surface of the REVO shaft will damage the exterior finish and weaken the shaft’s structural integrity and release potentially harmful materials that could affect your health. Any sanding, polishing, or treatment of the surface of the shaft with chemicals or abrasives of any kind will void the shaft’s limited-lifetime warranty and negatively affect the shaft’s longevity and performance. Never use talcum powder, baby powder, hand chalk, or other shaft treatments on a REVO carbon fiber composite shaft.

To clean the surface of your REVO carbon composite shaft, you can use one of the following two solutions: REVO Wipes, or Isopropyl Alcohol (90%) cleaning.

Step 1. Wipe the shaft with the included microfiber cleaning cloth, brushing away any lose dirt, dust and debris.
Step 2. Using a REVO wipe or soft cloth towel with a reasonable amount of Isopropyl Alcohol (90%), work up and down the shaft, from the joint end toward the tip while rotating your hand around the shaft’s circumference. You may see dirt on the towelette – this is normal. Continue to work the shaft until all areas have been thoroughly wiped, allowing 1-2 minutes for the surface to dry.

Unfortunately we are not able to grant a discount for this product.